BIRCOsir® Small dimensions
Channel cutting 90°, incl. grating
| Designation | Article No. | PG |
|---|---|---|
| Section 90 degrees, | 90090003 | 9005 |
Mitre cut as per specified angle, incl. grating
Please note that two mitre cuts are required and calculated per corner connection.
| Designation | Article No. | PG |
|---|---|---|
| Mitre cut to specified degree, | 90090004 | 9005 |
Please note that two metre cuts are required and calculated per corner connection.
| Designation | Article No. | PG |
|---|---|---|
| Mitre cut to specified degree, | 90090004 | 9005 |
Bore hole I horizontal position
| Designation | Article No. | PG |
|---|---|---|
| Drill hole horizontal NW70 | 090111 | 9015 |
| Drill hole horizontal NW100 | 090102 | 9015 |
| Drill hole horizontal NW150 | 090105 | 9015 |
without socket
| Designation | Article No. | PG |
|---|---|---|
| Drill hole horizontal NW70 | 090111 | 9015 |
| Drill hole horizontal NW100 | 090102 | 9015 |
| Drill hole horizontal NW150 | 090105 | 9015 |
Bore hole I vertical position
| Designation | Article No. | PG |
|---|---|---|
| Drill hole vertical NW70 | 090110 | 9015 |
| Drill hole vertical NW100 | 090101 | 9015 |
| Drill hole vertical DN150 | 090104 | 9015 |
without socket
| Designation | Article No. | PG |
|---|---|---|
| Drill hole vertical NW70 | 090110 | 9015 |
| Drill hole vertical NW100 | 090101 | 9015 |
| Drill hole vertical DN150 | 090104 | 9015 |
with PVC socket
| Designation | Article No. | PG |
|---|---|---|
| Drill hole vertical DN150 | 090104 | 9015 |